The Challenges to Swim Spa Covers

Swim Spas represent unique challenges when it concerns covering them.
We can all concur that the swim spa has to be covered when not in use for all the same reasons a hot tub needs a cover. The challenge is that because of the length of the swim spa and the height of the sides, getting rid of and replacing the cover can be a lot more difficult.
Getting a brand-new swim spa is an amazing occasion in life. You’re anticipating the exercise you’ll receive from using it. Possibly you’re a little relieved to have lastly made a selection from the different models you took a look at. At any rate, you most likely weren’t believing much about the cover you would use.
Generally, the cover that gets back with your brand-new purchase will be a 4 area rigid foam filled cover that will split in the center and go off both ends.
No big deal.
Till it begins to get heavy.
Which it constantly does.
Every stiff foam filled Swim Spa Cover ever made winds up the same way and it is not the fault of the user. It’s a design defect. Built in obsolescence since as soon as it is placed in use over the warm water in your swim spa it is inevitable.
It’s not from rain, so having a taper will not make any difference. In fact you might have it under a roof and the cover will still get heavy.
The factor is the steam from the water. The particles of steam are really small as they rise from the water surface area. They make their way into the little fractures and crevices in the foam. Then as the steam cools it forms back into a liquid and ends up being caught in the cover.
It happens slowly and on a Swim Spa Cover which is made of private areas, at differing speeds. So ultimately you’ll discover a couple of of the sections are actually getting heavy. The bar lifters on completions of the swim spa aren’t much help because you still need to raise that heavy cover back up onto the spa which is a lot higher than a regular spa.
This is why SpaCap.com developed a different style for their Swim Spa Covers
Instead of using numerous foam panels to develop Swim Spa Covers that will eventually end up in some land fill, they created one that uses air chambers that do not suck up moisture.
In fact SpaCap.com Swim Spa Covers are light-weight, insulate better, will not blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these covers will not fade, or fall apart at the joints either. So if you own a swim spa, and you mean to keep using it everyday, SpaCap.com has the cover for it.
If you’re not all set to buy today, bookmark this site so you can discover it again when you’re prepared!

Leave a Reply

Your email address will not be published. Required fields are marked *