The Challenges to Swim Spa Covers

Swim Spas represent unique obstacles when it concerns covering them.
We can all concur that the swim spa needs to be covered when not in use for all the same reasons a hot tub needs a cover. The difficulty is that because of the length of the swim spa and the height of the sides, eliminating and changing the cover can be a lot more difficult.
Getting a brand-new swim spa is an interesting occasion in life. You’re eagerly anticipating the workout you’ll obtain from using it. Possibly you’re a little relieved to have finally selected from the different models you looked at. At any rate, you probably weren’t believing much about the cover you would use.
Usually, the cover that gets home with your new purchase will be a four section stiff foam filled cover that will divide in the center and go off both ends.
No big deal.
Till it starts to get heavy.
Which it constantly does.
Every stiff foam filled Swim Spa Cover ever made winds up the same way and it is not the fault of the user. It’s a design defect. Built in obsolescence because as soon as it is positioned in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper won’t make any distinction. In fact you could have it under a roof and the cover will still get heavy.
The factor is the steam from the water. The molecules of steam are very small as they rise from the water surface. They make their way into the little cracks and crevices in the foam. Then as the steam cools it forms back into a liquid and ends up being trapped in the cover.
It happens gradually and on a Swim Spa Cover which is made of individual sections, at differing speeds. So ultimately you’ll discover a couple of of the sections are really getting heavy. The bar lifters on completions of the swim spa aren’t much aid since you still need to lift that heavy cover back up onto the spa which is a lot higher than a regular spa.
This is why SpaCap.com came up with a various style for their Swim Spa Covers
Instead of using a number of foam panels to construct Swim Spa Covers that will ultimately end up in some landfill, they developed one that utilizes air chambers that don’t suck up moisture.
In fact SpaCap.com Swim Spa Covers are lightweight, insulate much better, won’t blow away in a wind storm or be harmed by snow or hail.
Covered with Sunbrella Marine material, these covers won’t fade, or fall apart at the seams either. So if you own a swim spa, and you intend to keep using it daily, SpaCap.com has the Swim Spa Cover for it.
If you’re not prepared to purchase today, bookmark this site so you can discover it again when you’re prepared!

Leave a Reply

Your email address will not be published. Required fields are marked *