Why Your Swim Spa Cover Stinks!

Hey, no offense, however your swim spa cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture seeps in and becomes trapped in between the external vinyl shell and the cling wrap foam cores. The warm, wet environment is perfect for mold and mildew and other forms of smelly stuff.
If moisture has actually permeated further into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, however also make the cover truly challenging to remove, and not as efficient at keeping the heat in the spa. Time for a much better type of swim spa cover.

Stinky Swim Spa Cover?!?
• Broken or damaged. Broken foam cores, ripped or used spots, torn seams. A spa cover that loses it’s arched roofing system line, to keep water draining pipes off properly, will eventually begin to puddle water, which is most likely time to buy a new swim spa cover! A spa cover with threadbare areas in the vinyl is likewise problem, and although you can stave off the unavoidable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your spa cover weekly for 2 hours of airing out. A better cover can hold up against longer durations, but it’s a great routine to get rid of the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow wetness to escape do so, but do not get rid of fragile foam panels unless absolutely needed.
• Poorly Made. It’s easy to make a swim spa cover with tape and staples, but it will not stop moisture extremely well. Even the best foam filled covers with vacuum-wrapped and heat welded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real service is a swim spa cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not stunned frequently enough, germs and algae can make the most of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your spa cover. Because the cover is so near to the spa, it soaks up the chemistry of the spa. Clean, clear and sanitary water is the very best environment to prevent foul-smelling spa covers. (Sorry however this is just BS) The fact is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor spa covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times each year, so that it constantly looks terrific, and is safeguarded from the elements. Once again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover. However it will assist your spa dealership pay their bills.

Your Choices

Fix Your Hot Tub Cover!
• Remove to Safe Location: This initial step might seem apparent, however you need a good location to enable the cover to sit undisturbed from family pets, wild animals, and winds. It needs to be a bright location if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as mild as possible. Do not use home cleaning products on your spa cover, unusual chemicals can wind up in your spa water. Carefully tidy all outside surface areas with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be avoided if possible, due to the fact that the panels could end up being harmed throughout elimination or cleansing. But if you figure out that there is something slimy inside, you can usually unzip and eliminate the panel for a cleaning inside and out.

How often does your spa dealership expect you to do all this? If your swim spa is secured from most sun and rain, twice per year. If it’s exposed it needs to be 3-4 times per year. Let that sink in a minute.

Much better Choice
The simplest remedy for a foul-smelling swim spa cover is to simply purchase a various sort of swim spa cover A foul-smelling swim spa cover simply means that your cover is handling moisture, and things are beginning to grow! Swim Spa Covers from SpaCap.com that doesn’t use foam however has sealed air chambers rather will prevent giving the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *